User's Manual

User Manual v1.0
UM - Everon 6000 DAS - 1-MAR-2021 - clear of comments| March 2021 |Page 130 of 174
Level
Description
x HCM firmware upgrade.
x R/O to all other parameters.
Group Admin
The group admin has the capabilities of all the other access levels and the permissions to create
and manage the users in the grou
p.
¾ To add users to a group
1. Log in as the group administrator (use relevant group name at log in).
2. In the main menu bar, click Æ
3. Click the button. The following form appears:
4. Enter the relevant data:
x The Name of the user (alphanumeric characters, no spaces)
x An access level according to Table 28: Group Users Access Levels.
x Set the user Password (at least 8 characters) and type it again in the Confirm (password) field.
Note: The strength of the password is indicated upon entering it in the field (i.e., very
weak/weak/reasonable/strong). Weak passwords will not be accepted.
When done filling in the information, click OK.
Note: A group can have up to 20 users. Maximum of 31 groups and 500 users per HCM.