User's Manual

User Manual v1.0
UM - Everon 6000 DAS - 1-MAR-2021 - clear of comments| March 2021 |Page 132 of 174
¾ Session Access and Timeout
Sessions are accessed or terminated according to the following criteria:
x Up to ten simultaneous sessions for multiple users are supported.
x The login of users is enabled according to priority. When the maximum number of multiple users are
logged in and another user attempts to login, the outcome depends on the level of the user attempting
the login:
x For a higher-level user, the lowest-level user with the longest session time is logged out and the
appropriate session termination message appears.
x For the same level or lower level than the lowest logged in level, session access is denied, and the
appropriate message appears.
x If no session activity is detected for the configured amount of time, i.e. session timeout, the session is
terminated.
¾ To configure the session timeout
1. In the main menu bar, click Æ .
2. In the Session Timeout Settings area, click the icon.
3. Enter a timeout value between 1-255 (minutes) or Never. Then click OK.