User's Manual

User Manual v1.0
UM - Everon 6000 DAS - 1-MAR-2021 - clear of comments| March 2021 |Page 140 of 174
The following table shows the available options for managing the RF channels map:
Table 30: Map Options
Option
Enables user to…
When clicking this button the following option appears:
Switch between saved maps: invalid map or valid map.
Save the map currently loaded in xls format.
Load a map from xls file.
Create a new map.
Add a new RF channel to the map
currently loaded.
Check validity of the map currently being edited. If the map is
successfully validated it will replace the existing valid map. If errors are
encountered, the map currently being edited will replace any existing
(previously saved)
invalid map.
Exit back to the main menu.
NOTE: before exiting, make sure to save changes to the edited map;
otherwise,
they will be lost.
A map of channels can have one of the following statuses.
Table 31: Map Status
Map status
Enables user to…
The map was submitted, but errors were found during activation.
The map was submitted, no errors were found during activation.
Map was not submitted yet.
Note: At any given time only 2 maps are saved: one valid map and one invalid map.