User's Manual

User Manual v1.0
UM - Everon 6000 DAS - 1-MAR-2021 - clear of comments| March 2021 |Page 157 of 174
¾ Radio Interface Frames (IHU/HEU)
¾ IHU Chassis
Radio Interface Frame Modules
RIMe – up to 8 modules per chassis
Single band module (see bands table)
Interfaces: UL, DL and duplexed interface ports, QMA RF
connectors
Weight: 1.9 lbs (0.9 kg)
DCM – up to 2 modules per chassis
Interfaces:
CPRI: 4x SFP+ (optical connectors)
Weight: 2.9 lbs (1.3 kg)
RIX- one module per chassis
Interfaces:
Two 9
-pin coaxial interface connectors (RF and Clock)
Two QMA
ports for reference clock connections between Radio Interface
Frames (IHU,
HEU)
Weight: 1.54 lbs (0.7 kg)
OIX - one module per chassis
Interfaces:
Two 9
-pin coaxial interface connectors (RF and Clock)
Weight: 1.54 lbs (0.7 kg)
PSM – up to 2 modules per chassis
Power Consumption 200 Watt (Full Chassis)
AC PSM: power input 120
-220 VAC; tri-pin
DC PSM: power input 48 VDC; 9A Max.; 6
-pin terminal block connector
On/Off power switch
Weight: 1.9 lbs (0.9 kg)
dHCM – one module per system
using IHU
and 7 HEU chassis
Interfaces:
Four RJ45 100 Mb Ethernet ports
- internal interfaces to
auxiliary control modules
One RJ45 1 Gigabit Ethernet LAN port
– for remote management
One RJ45 1 Gigabit Ethernet Local port
– for local configuration
and management
On
e RJ45 console port – for service personnel use only
(e.g., debugging, etc.)
SD card slot
– support for micro SD card up to 32 GB, used
for saving and importing system configuration files
Status LEDs: indicating power, module operation (RUN), system status and fan
operation of chassis
Weight: 2.2 lbs (1 kg)
ACM -one module per chassis
Interfaces:
Four RJ45 100 Mb Ethernet ports
- internal interfaces to dHCM
One RJ45 console port
– for service personnel only
Status LEDs: indicating power, module operation (RUN), system status and fan
operation of chassis To
dHCM RJ-45 internal port
Weight: 2.2 lbs (1 kg)