Spec Sheet

Corning Optical Communications

E62-A3-E3-N3 Specification Sheet | 28 March 28, 2022 | Page

Features

1200MHz Transmission Bandwidth over 1 fiber

8 x 3GPP Band per Remote

Sub 6GHz

Up to 200MHz IBW

Dry contact Alarm

25dBm Maximum Output Power per Band

Support Band or Channel Selective filter

Cascading up to 6 levels

E62-A3 - Access Unit Chassis

The E62-A3 – Access Unit Chassis is a standard 19-inch 2U rack-mounted shelf (1U fan unit included), which

serves as the host for Everon™ 6200. The E62-A3 provides coupling access to radio signal sources of multi-

operator, multi-system, and multi-band, forming digital optical signals and distributing static capacity

distribution to fiber-connected other type devices. One A3 supports up to eight optical interfaces connected

to E3s (Expansion Unit) or N3RUs (Remote Unit).

This document describes the installation procedure for the E62-N3 remote unit.

This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS.

You MUST have an FCC LICENSE or express consent of an FCC License to operate this device. NOTE: Only

authorized person can enter the area where the antenna is installed. And the person is fully aware of the

potential for exposure and can exercise control over his or her exposure by leaving the area or by some other

appropriate means. Awareness of the potential for RF exposure in a workplace or similar environment can be

provided through specific training as part of a RF safety program.