Spec Sheet

Corning Optical Communications
E62-A3-E3-N3 Specification Sheet | 28 March 28, 2022 | Page
4
The E62-N3RU is a low-power remote unit supporting cellular technologies on fiber optic cable using the CPRI
protocol. The N3 is ideal for multi-operator multi-band, static capacity distribution deployments of cellular
services in small-to-medium coverage areas. The N3 supports up to four 25 dBm RF channels. The N3 converts
an optical signal to RF and then transmits at the relevant 3GPP band and receives the analog RF signal,
conditions it, and converts it back to optical for routing to the E3 or A3.
The socket-outlet shall be easily accessible.
Please take attention that changes or modification not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
Specifications
E62-A3 - Access Unit Chassis
Supported Bands
Band
3GPP Band
Downlink
Uplink
Max IBW
600MHz
71
617-652
663-698
35
700 LU
12 & 13
729-756
699-716 & 777-787
27
700MHz LUPS
12 & 13 & 14
728-768
698-716 & 776-798
40
850E MHz
26
859-894
814-849
35
1900MHz
25
1930-1995
1850-1915
65
2100MHz
66E
2110-2200
1710-1780
90
2300MHz
30
2350-2360
2305-2315
10
2500MHz TDD
41
2496-2690
2496-2690
194
C-Band-1
n78
3450-3800
3450-3800
200