User's Manual

User Manual v1.0
UM - Everon 6000 DAS - 14-APR-2021 - clear of comments.docx| March 2021 |Page 137 of 202
Table 15: RIM Alarms Descriptions
Alarm Name
Description
Overall Status
Overall
status of enabled (unmasked) alarms.
HW Failure
Hardware failure during startup or during normal operation.
Over Temperature/Temp
Ambient temperature inside the RIM is more than 75°C.
Inconsistent Version/SW
Version
The module does not have the
defined active release.
Adjustment Fault
Unsuccessful adjustment procedure for the selected module.
Service State
Service has been disabled by the user.
DL Input Power Low
BTS RF power input to the RIM is at least 15 dB lower than the
configured
max expected power.
DL Power Overload
BTS RF power input to the RIM is at least 3 dB higher than the value measured
during the adjustment procedure.
Sync Loss
Only applicable for RIM
TDD
Green — indicates TDD sync lock between RIM and input signal.
Red
— TDD sync lock error (unlocked).
Clock Synthesizer
Only applicable for RIM
TDD
UL/DL Synthesizer and Reference Clock lock/unlock status.
Band Mismatch
Only applicable for RIM
AWS
RIM bands are overlapping.
Table 16: DRU Alarms Descriptions
Alarm Name
Description
Inconsistent Version
The module does not have the defined active release.
Temperature
Ambient temperature inside the
DRU is high
HW Failure
DRU
faulty hardware upon initialization or during operation.
Overall Optical DCM Links
Overall status of enabled (unmasked) alarms
in input links.
Overall Optical RU Links
Overall status of enabled (unmasked) alarms
in output links.