User's Manual
User Manual v1.0
UM - Everon 6000 DAS - 14-APR-2021 - clear of comments.docx| March 2021 |Page 100 of 202
2.8.3.1 Mount chassis on the wall
Note: for dimensions and specifications refer to chapter 8
Mount each of the two brackets (Low and Mid) on the wall, and connect the modules to the bracket using
screws as follows:
1.
Before mounting the dHRU: unwrap each of the elements.
2.
Determine the location of the dHRU on the wall, while considering accessibility
3.
Connect the mounting bracket to the wall, using M10x110 screws:
4. Connect each of the modules to its dedicated position, according to the labels on the bracket:
Hang the unit on the hinge
using two screws M8X16
Hinges (bolts)
to hang units
Connect to
wall using
screws