User's Manual

User Manual v1.0
UM - Everon 6000 DAS - 14-APR-2021 - clear of comments.docx| March 2021 |Page 176 of 202
¾ To configure SNMPv2 parameters
1. In the main menu bar, click Æ
2. In the “V2 Configuration” area, click to change the current configurations.
The SNMP Community dialog appears:
3. Select/unselect the checkbox next to "Enable V2" to enable/disable SNMPv2.
4. If necessary, modify the community name in the Community field.
5. Click OK.
¾ To configure SNMPv3 parameters
1. In the main menu bar, click Æ .
2. Select the required user from the User Name list and click . The following dialog appears: