User's Manual

User Manual v1.0
UM - Everon 6000 DAS - 14-APR-2021 - clear of comments.docx| March 2021 |Page 177 of 202
3. Enable "V3" to get the SNMPv3 configuration options:
4. Configure the following SNMPv3 parameters for the user:
x Authentication protocol – MD5/SHA.
x Privacy protocol – None/DES/AES-128.
x Password – one password for both authentication and privacy protocols.
5. Select the internet protocol version (IPv4/IPv6) for the SNMP traps and enter the trap destination
address:
x IPv4 - SNMPv3 trap destination address: IP (x.x.x.x).
x IPv6 - SNMPv3 trap destination address: IP (0:0:0:0:0:0:0:0).
6. Click OK.