User's Manual

User Manual v1.0
UM - Everon 6000 DAS - 14-APR-2021 - clear of comments.docx| March 2021 |Page 69 of 202
3. For a dual unit:
 Connect the combiner to the mounted bracket using 4 screws.
 Connect between the low band and mid-band units, using the side-bracket:
Note: Ensure the low band device is connected at the bottom, and the mid-band on top!
 Connect between the two devices and the base bracket (already carrying the combiner), using 4
screws, as shown below:
Combiner in
bracket
Combiner
Mid-band
Low band
Low band
Mid-band
Combiner in
bracket