User's Manual

User Manual v1.0
UM - Everon 6000 DAS - 14-APR-2021 - clear of comments.docx| March 2021 |Page 133 of 202
5.2.5 Adjustment
The Adjustment tab allows the user to start the adjustment process. During adjustment the status and
relevant information are updated for each process.
After completing the configuration above, perform Adjustment.
¾ To perform adjustment:
1. Select the adjustment radio button
2. Click on Start Adjustment (default values: Do not run sensitive mode; Do not run BIT)
The process runs automatically, and returns the status (successful / failed)