User's Manual

User Manual v1.0
UM - Everon 6000 DAS - 14-APR-2021 - clear of comments.docx| March 2021 |Page 158 of 202
5. The new user account is added to the operator list. For example:
ATNT operator has three users defined: admin, RF and Installer.
6. Users can be removed from the operator list using the icon. User information, including
password, can be modified using the icon. The operator administrator can change the passwords
of the users in the operator.
Note: Users with "Operator Admin" access level can be added by the operator admin. The original
operator admin can be removed.
¾ To modify Password by the user
1. In the main menu bar, click Æ .
2. Click the button. The following form appears:
3. Enter the old password and the new password, confirm the new password and then click "SAVE".
The password must consist of at least 8 alphanumeric characters, no spaces. Weak passwords will not be
accepted.
Note: The operator admin can change the passwords of the users in his operator as explained in
the flow above: "To add users to a operator" step 5.