User's Manual

Corning Optical Communications
User Manual
|
Page 11
Rack Installation
The Access Unit is a 19” 1U equipment shelf. When installing the Access Unit in a rack, make sure the mechanical
loading of the rack is even to avoid a hazardous condition. The rack should safely support the combined weight of all
the equipment and be securely anchored. Installing the Access Unit in a climate-controlled room with sufficient air
circulation is recommended as the maximum ambient temperature is +50°C.
To install the Access Unit in the equipment rack.
1. Attach the 19" mounting brackets at the front of the PS-AU, using 4 screws M3×6 per bracket and the Phillips
screwdriver. Observe the orientation of the brackets.