Installation Manual

Installation Manual
|
CMA-795-AEN
|
Page 13
Rack Installation
The Access Unit is a 19-inch 1U equipment shelf. When installing the Access Unit in a rack, make sure the mechanical
loading of the rack is even to avoid a hazardous condition. The rack should safely support the combined weight of all the
equipment and be securely anchored. Installing the Access Unit in a climate-controlled room with sufficient air circulation
is recommended as the maximum ambient temperature is +50°C.
To install the Access Unit in the equipment rack.
1. Attach the 19-inch mounting brackets at the front of the AU, using 4 screws M3×6 per bracket and the Phillips
screwdriver. Observe the orientation of the brackets.
2. Recommended attaching the sliding rails to rack. (Not included in delivery).