Installation Manual

Installation Manual
|
CMA-795-AEN
|
Page 47
Optical Indicator
Each pair (2) of optical module cages has four LED indicator arrows. The two on the left are green, and the two on the
right are red, as shown in Figure below. The indicator arrows represent the synchronization status of the upper and
lower optical modules. When a pair of optical modules are synchronized (both uplink and downlink), the indicators turn
green as shown in the right pair of indicators in Figure below. When the optical module is unplugged or not
synchronized, the indicators are red, as shown in the left pair of indicators. Check whether both indicators turn green
after connecting one pair of optical modules. If the indicators are red, the terminal has not synchronized.