Installation Manual

Installation Manual
|
CMA-794-AEN
|
Page 24
Assemble Bracket I & II
Figure 36. Assembling Bracket I & IV
1. Assemble Mounting Bracket I & IV with 6 x
M3 x 6 screws.
Figure 37. Attaching Cable Tie to Mounting Bracket
2. Attach Nylon Cable Tie to the Bracket I &
IV combination.
Place the Bracket
Figure 38. Drilling a Hole
1. Drill a hole with a diameter of 90 mm for
putting Mounting Bracket I & IV.