Installation Manual

Installation Manual
|
CMA-794-AEN
|
Page 26
Buckle Up and Connect Wire
Figure 42. Connecting Bar over Hooks on Bracket II
1. Clip the bar on paired Bracket III over the
hooks on Bracket II.
Figure 43. Wire Connection Diagram
2. Connect the power cable and fiber cable to
E62-N2RU
Note: Connect power cable first and then
power it on. Do NOT connect the powered
cable to the E62-N2RU in case of excessive
current impulse.
Figure 44. Installation Completed Diagram
3. Engage the rotary hook on Bracket IV into
Bracket II