Installation Manual

Installation Manual
|
CMA-794-AEN
|
Page 11
Attach A2 Handle
Figure 6. Attaching a 19-in Mounting Bracket
1. Attach the 19-inch mounting
brackets at the front of the A2,
using 4 screws M3×16 per
bracket and the Phillips
screwdriver. Observe the
orientation of the brackets.
Attach Sliding Rails and A2 to Rack
Figure 7. Attached Sliding Rails
1. Attach the sliding rails Ⓑ to the
rack.
Note: The sliding rails are not
included in the delivery.
Figure 8. Place A2 in Rack
2. Place the A2 in the rack.
Figure 9. Fix A2 with Screws
3. Secure the A2 using 2 screws
M6×16 on both sides and the
Phillips screwdriver.