Installation Manual

Installation Manual
|
CMA-794-AEN
|
Page 19
Figure 27. Separation of Adjacent EU-O
For rack installation, it is highly
recommended to use a fan tray in
the middle of 2 adjacent EU-O for
cooling.
Note: It will reduce service life if EU-
O is continuously working in a high-
temperature environment.
Connect Power and Ground Cable to EU-O
Figure 28. Connect Power Cable at Rear Side
1. Connect and lock the power cable
at the rear of the EU-O.
Figure 29. Connect Ground Cable at Rear Side
2. Connect and screw the ground
wire at the rear of the EU-O.