Installation Manual

Installation Manual
|
CMA-794-AEN
|
Page 18
Attach EU-O Handle
Figure 23. Attaching a 19-in Mounting Bracket
1. Attach the 19-inch mounting
brackets at the front of the EU-O,
using 4 screws M3×16 per
bracket and the Phillips
screwdriver. Observe the
orientation of the brackets.
Attach Sliding Rails and EU-O to Rack
Figure 24. Attached Sliding Rails
1. Attach the sliding rails Ⓑ to the
rack.
Note: The sliding rails are not
included in the delivery.
Figure 25. Place EU-O in Rack
2. Place the EU-O in the rack.
Figure 26. Fix EU-O with Screws
3. Secure the EU-O using 2 screws
M6×16 on both sides and the
Phillips screwdriver.