Installation Manual

Installation Manual
|
CMA-794-AEN
|
Page 14
MOUNT THE A2 ON THE WALL
Attach Handle to A2
Attach the 19-inch mounting brackets to the rear of the A2 unit, using 4 screws M3×16 per bracket
and the Phillips screwdriver. Observe the orientation of the brackets shown in Figure 17.
Figure 17. Attaching a 19-in Mounting Bracket
Mount A2 to Wall
Figure 18. Marking the position of mounting holes
1. Hold the A2 to the installation
location and mark the position of
the 4 mounting holes in the
mounting brackets.
2. Drill the mounting holes according
to the chosen mounting
accessories.
Figure 19. Mounting completed
3. Attach the dowels, expansion
screws, and fasten the A2 to the
wall.