Installation Manual

Installation Manual
|
CMA-794-AEN
|
Page 12
Figure 10. Separation of Adjacent A2
For rack installation, it is highly
recommended to use a fan tray in
the middle of 2 adjacent A2 units for
cooling.
Note: It will reduce service life if A2
unit is continuously working in a
high-temperature environment.
Fan Installation
Figure 11. Fix Fan with Screws
1. Secure the fan using 2 screws
M6×16 on both sides and the
Phillips screwdriver.
Figure 12. Plug AC Power Lead
2. Plug AC power lead.