PRINCIPLES OF PRUNING Definitive Guide for Pruning Confidence
MAX Corona’s best-in-class tools, designed for professionals and passionate gardeners looking for heavy-duty durability and lasting performance, season after season.
RED Designed for general, less intense use by casual gardeners and landscaping enthusiasts who want comfort and control.
THE PRINCIPLES OF PRUNING Proper pruning improves shrubs and trees in any number of important respects, but improper pruning can be more harmful than none at all. Confidence and skill in pruning is gained through experience, so do not shy away from the task. On the other hand, understand the basics before proceeding. The principal reasons for pruning are: The principal reasons for pruning are: • To produce more or better blooms and/or fruits. • To maintain health.
HOW PLANTS GROW Before you start out to prune, learn how plants grow. Trees and shrubs put on new growth each year from the ends of the branches (terminal buds) and from side branches (lateral buds). A plant’s direction and rate of growth are determined by its terminal buds. Lateral buds form branches and twigs that fill in the skeleton of major branches. Dormant buds, which are much less obvious and sometimes hidden below the bark, held in reserve.
PRUNING TOOLS When selecting a pruning tool, the most important thing to consider, is it the right tool for the job. The right tool will assure that you are successful, get the job done confidently instead of quickly, is better for the plant or tree and save excess wear and tear on you. Tools are an investment so purchase the best tool you can afford. Quality tools, when properly cared for, will last many seasons and do a far better job than cheaply made ones.
PRUNING TOOLS AP 3234 SL 7180 RS 7265 Anvil have a straight-edged blade that cuts against a soft metal anvil. They are ideal for cutting harder, dead wood and should not be used on live stems as it will crush it rather than leave a smooth cut. you have to open the tool wider than its natural open position, the limb is likely bigger than the pruner is designed to cut. When in doubt go with a larger cutting tool like a lopper.
PRUNING TOOLS TP 6870 Tree Pruners or Pole Pruners are handy for high work, especially in places where using a ladder would be dangerous. Do not attempt to cut dead wood more than 1-inch in diameter with a pole pruner. 8 HS 4344 Hedge Shears are long-handled shears with straight blades at least 8 inches long designed to clip soft young growth on hedges and smaller vines. They will not cleanly cut older, harder wood and should not be used in place of hand shears or loppers.
TIPS FOR MAINTAINING YOUR TOOLS Pruning tool blades that are coated with sap or debris, rusted or dull will decrease their performance. It will be harder to make cuts and will not cut cleanly, that to which will present opportunities for disease and pests. Clean tools after each use with a moistened cloth or towelette with water and mild cleaner like Lysol® or Pine Sol® to remove loose debris. For harder, caked on debris, go for a stiff wire brush, then wipe them down with a moist cloth.
TIPS FOR MAINTAINING YOUR TOOLS 10 Protect the Metal - Apply a generous coat of machine or natural oil on the exposed metal. It will form a protective coating that prevents moisture and water from collecting on the metal. It also helps prevent debris from sticking to the tools during use, making them easier to wipe clean. Give wood handles a coat of linseed oil to protect the finish and prevent moisture from getting on the wood.
PRUNING CUTS EVERY GARDENERS SHOULD KNOW Pruning is necessary to promote good plant health, remove damaged limbs, encourage new growth, and maintain shape. There are four basic pruning cuts, each aimed at producing a different effect. Use sharp, clean tools and wipe-down blades with a clean cloth when moving from plant to plant.
coronatoolsusa.
PRUNING THROUGH THE LIFE OF A TREE Presented by: Proper pruning will get a tree off to a good start and keep it safe and healthy through its life.
PRUNING THROUGH THE LIFE OF A TREE pruning would require a ladder, your wisest move is to call in a professional. Pruning without the proper knowledge and training can not only lead to accidents, but do long-term damage to a tree, causing it to decline or die. Certified arborists are trained not only in safety but in tree care. They know how each kind of tree needs to be pruned to preserve its characteristic form.
coronatoolsusa.
TREE PRUNING METHODS Presented by: Proper pruning is an art based on scientific principles of plant physiology. At its most basic level, pruning trees involves removing damaged, dead or structurally weak limbs, which will improve a tree’s health and reduce the chances of personal or property damage caused by falling limbs. More advanced pruning methods aid in improving the tree’s structure and long-term health.
TREE PRUNING METHODS There are also certain pruning practices that are not acceptable and can injure trees: Topping The reduction of a tree’s size using cuts that shorten limbs or branches back to a predetermined crown limit, often leaving large stubs. 90˚ 45˚ 45˚ Lion’s Tailing The removal of an excessive number of inner branches from the tree. Rooster-Tailing The over-thinning of palms by removing too many lower fronds. An understanding of the end goals lie at the heart of good pruning.
PRUNING DOs AND DON’Ts DO: Presented by: • Ask your arborist or tree care company if they prune according to the American National Standards Institute standard for tree pruning, which is called ANSI A300. This standard recommends, and in some cases requires, that the use of certain tools, cutting techniques and pruning methods be followed, and sets the standard definitions for terms the arborist will use in your estimate.
PRUNING DOS AND DON’TS DON’T: • Prune without a good reason • Remove any more than 25 percent of foliage during a growing season. • Prune a newly planted tree for the first year, unless you are removing dead or broken branches. • Prune within 10 feet of a utility conductor – leave it to the pros. • Try to tackle a pruning job that requires a chain saw and ladder work – leave it to the pros. • Leave branch stubs, or cut off the branch collar (not make a flush cut).
PRUNING FAQS Q: What is the best time of year to prune? Although it all depends on your pruning objectives, most trees can be pruned year-round, if pruned properly. In fact, winter can often be the best time for an arborist to prune. Since the leaves are off, the view of the entire tree’s architecture is clear and a thorough check can be performed. They can locate deadwood by looking for changes in branch color, fungus growth, cracks, and other symptoms that can help them make this determination.
TOPPING IS FOR ICE CREAM, NOT TREES! Topping is not an acceptable practice. Topping is when a tree is indiscriminately cut back to stubs. Usually topping is done to flat-top the tree or cut it back on all sides. The result is unsightly. Topping is often sold as a method to reduce tree size, however studies have shown that a topped tree will actually grow larger over a five-year period compared to an unpruned control tree.
SHADE TREES A tree’s first few years are critical. Pruning then has a profound effect on the ultimate size, shape, and health of the mature tree. Pruning When Planting Shade trees are usually sold balled and burlapped, that is, with most of their roots intact and surrounded by soil. Such trees need little pruning when planted. Simply remove any twiggy growth that won’t be part of the tree’s framework of branches. Container-grown trees need almost no pruning, since none of their roots have been removed.
SHADE TREES cut back the main stem of an especially spindly bareroot plant to encourage branching. Mature Trees Mature trees that have been pruned since planting require little besides maintenance care: removal of dead or damaged wood or the occasional general thin- 1 2 ning to allow more air into the crown. Always cut large limbs back to a live branch or the main trunk. Most branches have an obvious, sometimes wrinkled, swelling at their base.
PRUNING FRUIT TREES ant. Unlike pruning ornamental trees and shrubs, properly pruning fruit trees makes a difference between large, annual crops of excellent fruit and spotty, intermittent crops of variable quality. Fruit trees are encouraged to bear lots of large fruits, pruning to develop a strong branch system capable of withstanding the annual load of ripe fruit is also critical. For tips on basic pruning techniques and the best times to prune, see “Pruning Methods” and “When to Prune”.
PRUNING FRUIT TREES es from one main trunk. Remove branches growing from the trunk to maintain open space between limbs, and also thin the secondary branches that grow from these limbs. Prune to allow sunlight and air to reach the center of the tree. Modified leader This method began the same as the central leader system, with one strong central trunk.
PRUNING FRUIT TREES A fruit tree allowed to bear all the fruit it sets in the spring will produce scads of poor-quality fruit, or it will produce well only every other year. For consistently good crops you must thin clusters of young fruit to a single fruit. Do this when the fruit is still small (marble to golf-ball size). Each fruit should be 6 inches or more from its neighbor. Such thorough fruit thinning is time-consuming, but you will appreciate the effort come fall.
PRUNING FRUIT TREES Prune plums to an open center. Japanese plums, like peaches, require lots of pruning. Keep after them every year in late winter. European and American plums need much less pruning; an occasional thinning is all that is needed.Many plums bear heavily only every other year. To encourage good annual crops thin young fruit so that the plums are at least 5 inches apart. a modified leader as the tree matures.
AFTER THE STORM: TLC FOR YOUR TREES Besides being the most notable features of your yard, trees are also likely to be your property’s most valuable feature. They are investments that mature over time. Whatever you spent on them initially is only a fraction of what they are worth, monetarily and environmentally, as they grow year after year.
AFTER THE STORM: TLC FOR YOUR TREES Don’t over prune or top: Removing problem branches may leave your tree looking uneven or bare in spots. Resist the temptation to over prune in an effort to make the tree more symmetrical. Small branches and leaves will grow back soon enough, promising the tree will once again be full and balanced. Cutting back healthy limbs (topping) to deter future storm damage should also be avoided.
INSPECTING TREES FOR SAFETY Acute stress occurs suddenly and causes almost immediate harm. Damage caused by flooding, drought, wind, and untimely frosts and freezes are examples of acute stress. Presented by: Chronic stress occurs over time and can be brought on by a nutritional imbalance, improper soil pH, or other factors that take a longer time to develop. Chronic stress is bad enough, but it can be compounded by disease and insects that prey on weakened trees.
INSPECTING TREES FOR SAFETY Here are a few things to look for when inspecting your trees for safety: • Large, dead branches or branches that are just hanging around can pose a danger. The best time to check for these potential threats is late fall or winter when there is little or no foliage to obstruct your view. • Cavities, rotten wood, or cracks and splits along the trunk or major branches may provide an entrance for cankers and wood-rotting organisms. • Wires in contact with tree branches.
PRUNING ROSES As a consulting rosarian that speaks, grows, photographs, and shows roses, company founder Susan Fox was recently awarded the American Rose Society’s (ARS) Presidential Citation “for Promoting the Rose and Rose Education Via Social Media.” She is one of the most highly regarded rosarian’s and gardeners in the industry. Visit her website at gagasgarden.com Susan Fox Depending on the season where you live pruning time can come between the middle of January and the end of April.
FALL ROSE PRUNING | WINTERIZING YOUR ROSES “There are many factors why plants are winter hardy. When artificial means are used to bring a plant through winter, ofter they can conflict with some beneficial factors. For die-back-hardy woody plants, the simplest winter protection technique is applying a few inches of mulch year round. This allows the plant in the autumn to grow into its fullest state of natural dormancy. It prevents the soil from getting as cold as would in open ground.
FALL ROSE PRUNING | WINTERIZING YOUR ROSES There are several reasons to prune your roses: • Removing dead or diseased canes • Remove non-productive branches and make room for ones that will make flowers • Removing crossing branches that clutter the bush or damage others • Open up the interior of the bush for ease in spraying and to promote good flowering stems; • Remove non-productive canes at the base to promote growth of new vigorous canes Finally, shape the bush to please you.
SYMMETRY AND BALANCE Overall, shearing shrubs into uniform balls and transforming trees into green lollipops should be avoided. Such pruning produces an overly dense canopy of vigorous but weak branches that hinders sunlight and air from reaching into the interior of the plant. Some species can tolerate this, but most become more prone to disease and breakage. Instead, take a critical look at deciduous trees and shrubs to get an idea of where branches are headed as they grow.
ORNAMENTAL VINES Whether they climb, creep, cling, twine, or flop and scramble, vines have one thing in common: given favorable conditions they grow like crazy. Pruning vines is largely a matter of keeping them in bounds, and that is best done by controlling growth from the day you plant a vine. When planting, select several of the strongest shoots and prune them back to half their length to encourage more new shoots to grow from the base. As a vine grows, keep it in check.
coronatoolsusa.
WORKING WITH WOODY SHRUBS Presented by: Shrubs can vary greatly in their pruning needs even shrubs in the same genus (hydrangeas or roses, for example) may have very different requirements. This is why it’s always a good idea to seek out in-depth instructions for a particular plant to ensure you are giving it the most appropriate care. That said, most deciduous shrubs tend to be fairly forgiving when it comes to pruning.
SMALL BERRY FRUITS Small-berry fruits require regular pruning. Without annual pruning grape vines bear many small, poor fruits, and bramble fruits become unapproachable (much less harvestable) masses of prickly brambles. Grapes produce fruit on new lateral growth from yearold stems. Prune grapes to limit the number of new laterals and the number of fruit clusters per lateral. As with fruit trees, it is best to thin young fruits to direct more of the plants’ strength into producing fewer, better fruits.
SMALL BERRY FRUITS except for four lateral shoots. Prune these back to two buds. In the third winter cut back the upper cane of each pair to two buds. (This will become next year’s replacement canes.) Cut the lower cane back to 12 buds. This year’s fruit will be borne on these canes. In subsequent years, remove the cane that bore fruit the previous year. Cut the upper cane of the replacement pair back to two buds; the lower cane back to 12 buds.
ACKNOWLEDGEMENTS This booklet is the result of a collaborative effort on the part of numerous individuals and horticultural organizations throughout the United States. Their knowledge and experience in pruning techniques have helped make the “Principles of Pruning” a clear, concise guide to pruning that is both informative and easy to use. Our thanks to: The Chicago Botanic Garden The Fort Worth Botanic Garden The Florida Cooperative Extension Service of Orange County Bonnie J. S. Day-M.S.
NOTES 42 coronatoolsusa.
PRINCIPALES PARA PODAR La guia definitiva para podar con confianza PERFORMANCE DURADERO DESDE 1928
MAX Las herramientas de la mejor clase de Corona, está diseñado para profesionales y jardineros apasionados, buscando alta durabilidad y alta calidad, temporada tras temporada. • Máxima nitidez/durabilidad/resistencia • Forjadas, de acero de alto calibre y materiales de alta calidad que ofrecen resistencia y buen funcionamiento • Garantía limitada de por vida • Alto programa de repuestos • Fundado sobre el patrimonio de Corona 44 coronatoolsusa.
RED Diseñado para uso general, trabajo menos intenso por jardineros ocasionales y entusiastas del paisajismo que quieren comodidad y control. • Herramientas con muchas características con un rendimiento y bajo precio • Garantía Limitada • Partes de repuesto limitadas 45 coronatoolsusa.
PRINCIPALES PARA PODAR El podar apropiadamente, mejora arbustos y árboles en varios aspectos importantes, pero la poda inadecuada puede perjudicar más a sus plantas que si no las hubiera podado nunca. La confianza y destreza cuando poda, más que todo se obtiene con experiencia, asi que no cree desconfianza, que la practica hace al maestro. Por lo contrario, hay que entender lo básico antes de empezar a podar. Las razones para podar son: Las razones para podar son: • Para producir o mejorar frutos o flores.
COMO CRECEN LAS PLANTAS Antes de empezar a podar, hay que aprender cómo crecen las plantas. Los arboles y arbustos ponen un nuevo crecimiento cada año desde los extremos de las ramas (yemas terminales) y de ramas laterales (yemas laterales). La dirección y tasa de crecimiento de la planta está determinada por sus brotes terminales. Los brotes laterales forman ramas y las ramitas que llenan en el esqueleto de ramas principales.
HERRAMIENTAS DE PODA Al seleccionar una herramienta de poda, lo más importante a considerar, es la herramienta adecuada para el trabajo. La herramienta adecuada asegurará que tenga éxito, y a hacer el trabajo con confianza en vez de rápidamente, es mejor para la planta o árbol y guarde el exceso de desgaste para usted. Las herramientas son una inversión, entonces compre la mejor herramienta en su presupuesto.
HERRAMIENTAS DE PODA AP 3234 usted esta cortando ramas más pequeñas que tienen resina, busque las tijeras que tengan hojas antiadherentes, para que estas no se peguen. Podadora tipo yunque son las tijeras que tienen hojas rectas. Son ideales para cortar madera dura, y no debe de usarse en ramas que estén vivas, ya que esta las machacara y no dejara un corte limpio.
HERRAMIENTAS DE PODA RS 7265 TP 6870 Sierra de podar son las sierras para podar ramas mas de 1 pulgada de diámetro. Estas tienen hojas curveadas, las cuales son diseñadas para hacer cortes en las ramas fácilmente y uniformemente. Podadoras de arboles o podadoras de alto alcance, son de mucha ayuda cuando necesita hacer trabajos en lugares donde se necesita una escalera porque son muy altos. Esto puede ser peligroso.
CONSEJOS PARA MANTENER SUS HERRAMIENTAS Las hojas de estas tijeras para podar, están cubiertas con un lubricante antiadherente ya que cuando las hojas están oxidadas, estas pueden empeorar su desempeño. Esto va a crear dificultad al hacer cortes, y no va a crear cortes limpios y esto puede abrir puertas para que las infecciones y pestes entren a la planta. Limpie su herramienta después de cada uso con un paño con un poco de agua y un desinfectante como Lysol® o Pine Sol® para eliminar los restos.
CONSEJOS PARA MANTENER SUS HERRAMIENTAS 52 Proteja el metal - aplique una cantidad generosa de algún aceite natural en el metal donde corta. Esto va a crear una barra protectora para que el agua no penetre en el metal. Esto también va a prevenir que los restos se le peguen a la herramienta, y va a hacer el paso de limpiar su herramienta más fácil. Consejo: No utilice un estropajo de aluminio, que esto puede crear más oxido en las hojas.
CORTES DE PODA QUE TODO JARDINERO TIENE QUE SABER La poda es necesaria para promover la salud de una planta, quitar miembros dañados, estimular el nuevo crecimiento y mantener la forma. Hay cuatro cortes de poda básica, cada uno dirigido a producir un efecto diferente. Utilice herramientas afiladas, limpias y limpie abajo las hojas con un paño limpio al moverse de planta a planta.
coronatoolsusa.
PODANDO A TRAVÉS DE LA VIDA DE UN ÁRBOL Cuando usted poda correctamente, va a ayudar a que la planta este segura y saludable por el resto de su vida. Estructura: Podar un árbol joven para que este agarre la estructura correcta, puede eliminar muchos problemas más adelante. Arboles de muchas especies son los más fuertes si ellos tienen una estructura fuerte en el centro.
PODANDO A TRAVÉS DE LA VIDA DE UN ÁRBOL prevenir esto, pode todas las ramas cerca de signos, carreteras y aceras. Es mejor anticipar los problemas y podar antes de que estos se vuelvan grandes y fuertes y cueste más podarlos. Una vez el árbol es suficientemente grande que podar necesite una escalera, es mejor que usted contacte a un profesional para que haga eso.
Visite treecaretips.org para localizar a un arbolista profesional en su área loveyourlandscape.org para buscar a paisajistas profesionales. 57 coronatoolsusa.
MÉTODOS PARA PODAR ARBOLES Presented by: Poda correcta es un arte basado en principios científicos de la fisiología vegetal. En su nivel más básico, podando árboles consiste en extraer dañados, muertos o estructuralmente débiles extremidades, que mejoran la salud de un árbol y reducen las posibilidades de daños causados por una caída de ramas. Los métodos más avanzados cuando uno poda, ayuda a mejorar la salud y estructura de un árbol a largo plazo.
MÉTODOS PARA PODAR ARBOLES También hay ciertas prácticas de poda que no son aceptables y pueden lesionar árboles: Rematar La reducción del tamaño de un árbol con cortes para acortar ramas o ramas hacia un límite predeterminado desde la corona, a menudo dejando grandes talones. 90˚ 45˚ 45˚ Cola de León La eliminación de un número excesivo de interior ramas del árbol. Cola de Gallo Exceso de adelgazamiento de las palmas mediante la eliminación de demasiadas hojas inferiores.
LO QUE HACER Y LO QUE NO CUANDO PODA HACER: Presented by: • Preguntarle al alborista o a la compañía de cuidado de arboles si ellos podan según el instituto estándar nacional americano para podar arboles, el cual se llama ANSI A300. Estas recomendaciones estándares y en algunos casos requieren algunas herramientas, técnicas de corte y métodos de podar que tienen que ser seguidos. • Recuerde que podar pobremente puede causar daño para su árbol de por vida.
LO QUE HACER Y LO QUE NO CUANDO PODA NO HACER: • Pode sin ninguna buena razón • Remueva más del 25% de las flores o hojas de su árbol cuando estas están creciendo. • Pode una planta que acaba de plantar por el primer año, solamente si va a eliminar ramas muertas o rotas. • Pode en menos de 10 pies de un conductor de utilidades, esto déjeselo a los profesionales • Intente hacer un trabajo que requiera escalera o herramientas de energía, esto déjeselo a los profesionales.
PREGUNTAS FRECUENTES AL PODAR P: ¿Cuál es el mejor tiempo del año para podar? Aunque todo depende de los objetivos de la poda, mayoría de los árboles pueden ser podados durante todo el año, si poda correctamente. De hecho, invierno puede a menudo ser el mejor momento para podar. Puesto la visión de la arquitectura de todo el árbol y las hojas están claras y se puede realizar una comprobación exhaustiva.
¡DESMOCHAR ES PARA HELADOS, NO PARA ARBOLES! El desmocho no es una práctica aceptable. Desmochar es cuando un árbol se recorta indiscriminadamente a talones. El desmoche generalmente se hace en el plano del árbol o recortar por todos lados. El resultado es antiestético.
ARBOLES DE SOMBRA Los primeros años de un árbol son críticos. Luego la poda tiene un profundo efecto en el tamaño final, la forma y la salud del árbol maduro. Podar cuando planta Los arboles de sombra se venden generalmente con la mayoría de sus raíces intactas y rodeados por el suelo. Estos árboles necesitan poca poda cuando se plantan. Simplemente eliminar cualquier crecimiento de ramitas que no será parte del marco del árbol de ramas.
ARBOLES DE SOMBRA Usted puede recortar el tallo principal de una planta de raíz descubierta especialmente delgadas para favorecer la ramificación. Árboles maduros Árboles maduros que han sido podados desde plantación requieren poco además de mantenimiento: eliminación de madera muerta o dañada o el adelga- 1 2 zamiento general ocasionales para permitir que más aire en la corona. Siempre hay que reducir grandes extremidades en una rama viva o el tronco principal.
PODANDO ÁRBOLES FRUTALES muerta o enferma o madera que crece en direcciones torpes a los arboles. A diferencia de la poda de árboles ornamentales y arbustos, podar los árboles frutales correctamente hace una diferencia entre cultivos anuales grandes de excelentes frutos y cultivos irregulares, intermitentes, de calidad variable. Para consejos sobre técnicas básicas de podar y el mejor momento para podar, consulte “Métodos para” y “Cuando a podar”.
PODANDO ÁRBOLES FRUTALES principal. Quite las ramas que crecen del tronco para mantener el espacio abierto entre los miembros y las ramas secundarias para que crezcan a partir de estas extremidades. Pode para permitir que la luz del sol y el aire para llegar al centro del árbol. Líder modificado Este método empieza como el líder central, con un tronco central fuerte.
PODANDO ÁRBOLES FRUTALES Un árbol frutal permitido a tener toda la fruta que retoña en la primavera, producirá fruta de mala calidad o solamente va a producir buenos frutos de vez en cuando. Para tener buenas cosechas consistentemente, debe de adelgazar los racimos de fruta. Haga esto cuando la fruta es pequeña (de el tamaño de una pelota de golf). Sabemos que adelgazar la fruta consume mucho tiempo, pero va a apreciar el esfuerzo.
PODANDO ÁRBOLES FRUTALES dentro del campo. Pode en invierno mientras que los árboles están latentes todavía cuando puede quitar cualquier madera dañada por el frío. Entrene a un árbol de pera de la misma manera como una manzana, con un líder central que puede formar un líder modificado a medida que el árbol madura. Como con las manzanas, necesitan una ligera poda anual para eliminar chupones, madera muerta o dañada y fomentar la difusión de forma que es preferible podar ocasionalmente.
DESPUÉS DE LA TORMENTA: DELE AMOR Y CARIÑO A SUS ÁRBOLES Aparte de ser una de las cosas más notables, los arboles también son una de las cosas más valiosas en su propiedad. Hay inversiones que maduran a través del tiempo. Lo que se gasta al principio solo es una fracción de lo que van a costar, monetariamente y para el medio ambiente, ya que crecen año tras año.
DESPUÉS DE LA TORMENTA: DELE AMOR Y CARIÑO A SUS ÁRBOLES za interior (verde) lo menos posible, ya que es la capa que lleva todos los nutrientes por todo el árbol. No sobre pode: quitar ramas del problema puede dejar su árbol mirando desigual o desnudo en algunos lugares. Resistir la tentación de sobre podar es difícil, mas cuando quiere que todo se mire simétrico. Las hojas y las ramas pequeñas volverán a crecer pronto, prometiendo que el árbol vuelva a ser completo y equilibrado.
INSPECCIONANDO ÁRBOLES PARA LA SEGURIDAD Presented by: El estrés agudo ocurre pronto y causa un daño casi inmediato. Los daños causados por inundaciones, sequia, viento y heladas son ejemplos de estrés agudo. Estrés crónico se produce con el tiempo y puede ser provocado por un desequilibrio nutricional, pH de aceite inadecuado u otros factores que tienen más tiempo para desarrollar.
INSPECCIONANDO ÁRBOLES PARA LA SEGURIDAD Aquí están algunas cosas para que busque cuando inspeccionan la seguridad en sus árboles: • Las ramas largas y muertas o ramas que solo están colgando pueden causar peligro. La mejor manera para chequear estos peligros es en invierno o primavera cuando casi no hay hojas en los arboles que obstruyan la vista.
PODAR ROSAS Susan Fox es una consultora de rosas que habla, crece, fotografía y ensena rosas y ella fue actualmente premiada la por la Sociedad de Rosas Americanas (American Rose Society) con una cita “por promover la educación de las rosas y las rosas por medios sociales”. Ella es una de las más personas más consideradas en la industria de las rosas y jardineros. Visite su página web a www.gagasgarden.
PODAR UNA ROSA EN OTOÑO | ADAPTANDO PARA EL INVIERNO A SUS ROSAS “Hay muchos factores por qué las plantas son resistentes al invierno. Cuando se utilizan medios artificiales para traer una planta de invierno, a menudo puede entrar en conflicto con algunos de los factores beneficiosos. Para las plantas leñosas, la técnica más simple de protección de invierno es aplicando unas pocas pulgadas de pajote durante todo el año.
PODAR UNA ROSA EN OTOÑO | ADAPTANDO PARA EL INVIERNO A SUS ROSAS Hay varias razones para podar sus rosales: • Retirar bastones muertos o enfermos • Quitar ramas no productivas y hacer espacio para los que florecerán • Quitar ramas que se cruzan y pueden dañar a otras • Aben el interior del arbusto para facilitar la pulverización y promover buena floración en los tallos • Eliminar varas no productivas en la base para promover el crecimiento de nuevas varas vigorosas Por último, forme el arbusto que lo complazc
SIMETRÍA Y BALANCE En general, se debe evitar los arbustos en bolitas uniformes y transformar arboles en paletas verdes. Este tipo de poda produce una densidad vigorosa y causa que haya muchas ramas débiles que al final impiden que la luz del sol y el aire lleguen al interior de la planta. Algunas especies pueden tolerar esto, pero la mayoría se convierten más propensas a las enfermedades y las roturas.
VIÑEDOS ORNAMENTALES Si escalan, se arrastran, se aferran, guita, y se desordenan. las viñas tienen una cosa en común: dadas las condiciones favorables que crecen como locas. La poda de vides es principalmente una cuestión de mantener en límites, y que se realiza mejor mediante el control de crecimiento desde el día en que planta una viña. Cuando plante, seleccione las ramas más fuertes y pódelas para estimular el crecimiento y que crezcan más ramas de la base.
coronatoolsusa.
TRABAJANDO CON ARBUSTOS LEÑOSOS Presented by: 80 Los arbustos pueden variar mucho en sus necesidades de poda, los arbustos incluso en el mismo género (hortensias o rosas, por ejemplo) pueden tener requisitos muy diferentes. Por esta razón es siempre una buena idea para buscar instrucciones detalladas para una planta en particular y asegurarse que le está dando el cuidado más adecuado. Dicho esto, la mayoría arbustos caducifolios tienden a ser bastante indulgente cuando se trata de poda.
FRUTAS DE BAYA PEQUEÑA Las frutas pequeñas y bayas requieren poda regular. Sin una poda anual, los viñedos de uvas llevan muchos frutos pequeños y pobres, y la zarza frutas se convierten en masas (mucho menos cosechables) inaccesibles de zarzas espinosas. Las uvas producen fruta en crecimiento lateral nuevo de tallos de años. Pode las uvas para limitar el número de nuevos frutos laterales y el número de infrutescencias por lateral.
FRUTAS DE BAYA PEQUEÑA el segundo invierno quite todo crecimiento excepto cuatro brotes laterales. Pode estas de nuevo a dos yemas. En el tercer invierno reduzca la caña superior de cada par a dos yemas. (Esto se convertirá en varas de recambio del próximo año). Corte la caña inferior a 12 yemas. El fruto de este año correrá en estas varas. En los años siguientes, quite la caña que dio sus frutos el año anterior. Reduzca la caña superior de la pareja de remplazo a dos yemas; y la caña inferior a 12 yemas.
RECONOCIMIENTOS Este libreto es resultado de una colaboración de esfuerzos por parte de muchas personas y organizaciones de horticultura de todo los Estados Unidos. Su sabiduría y experiencia en las técnicas de la poda han hecho “Las principales para Podar” una guía fácil de leer y concisa para poder informar al lector como se poda y lo fácil que es hacerlo. Agradecemos a: The Chicago Botanic Garden The Fort Worth Botanic Garden The Florida Cooperative Extension Service of Orange County Bonnie J. S. Day-M.
S EASON A F TER S EASON Corona, Inc. 22440 Temescal Canyon Road • Corona, CA 92883 (951) 737-6515 | (800) 847-7863 | sales@corona.bellota.com coronatoolusa.com Connect with Corona Tools! © Copyright 2019 Corona, Inc.