User's Manual

evoDrive User Guide Elster AMCO Water
TD520-02 Page 33 of 42 Draft 4 – 1June09
The procedure for ent ering m anual reads is as follows:
Ent ering Ma nual Re a ds
1. Touch on t he Get Lat / Lon but t on t o display t he
location of t he evoRTM/ account on t he m ap.
2. Drive t o that locat ion and exit the vehicle t o record
the m eter reading.
3. Ret urn t o t he vehicle and touch t he Ent er Manual
Read but ton located on t he Account I nform ation
window.
9 NOTE: The Ent er Manual Read but ton is only
enabled for account s t hat have not received a
‘good reading’ com m ent in the Account St atus
field.
4. Ent er the m anual read using the on- screen keypad.
9 Reading will be displayed in t he Ent er Reading
box.
5. Press Ent er when finished. A verification box will
display.
6. I f t he reading entry is
not
correct , press NO and
re- ent er t he reading.
7. I f reading is correct, press YES.
8. When finished, close t he Account I nform at ion
window by pressing t he Close butt on.
9. The Ent er Manual Read button is now disabled and
the reading value ( 43 in t his exam ple) is displayed
in t he reading field.
Transmit ON/OFF Button
This but t on allows you t o m anually t oggle t he evoDrive
transm itt er on and off for diagnostic purposes.
CAU TI ON ! The t ransm it ter m ust be ON t o enable route
reading.
STOP Button
Aft er t he Stop Rout e function has been execut ed, touch
the St op butt on t o exit t he evoDrive program .
Click on t he Quit but ton to t urn off the evoDrive.