User's Manual

File : CS-SUP-MUTI-WTHERMSPETEC-E02.sxw
5.5 WAKE-UP SYSTEM MANAGEMENT
In order to reduce module power consumption, a wake-up period parameter setting system is incorporated.
This system enables modification of the module wake-up period (default setting 1 s) by entering a time and
day of the week :
 The wake-up period default value may be modified;
 Two time-windows with different wake-up periods may be defined;
 Each day of the week may be set in one of the following three cases :
• Wake-up period default setting
• Wake-up according to predefined time windows
• No wake-up period (for safety reasons, the module is not disabled on reception and it
wakes up every 10 seconds)
The system is disabled by default and must be enabled by writing a specific profile in the wake-up
system status word.
5.5.1 CHOICE OF WAKE-UP MODE
These modes are directly dependant on the 'wake-up system status word' configuration and the values of
parameters associated with each mode.
Wake-up mode
Case n°1 : Periodic wake-up, without distinction of day of the week
Case n°2 : Periodic wake-up in specific time windows for certain days of the week, periodic wake-up for the other days
Case n°3 : Periodic wake-up for certain days of the week, periodic wake-up disabled for the other days
Case n°4 : Periodic wake-up in specific time windows for certain days of the week, periodic wake-up for some days and
periodic wake-up disabled for the remaining days
Remark: before enabling a specific wake-up mode, the parameters associated with this mode must
first be set.
➢ Example of different wake-up modes:
WaveTherm module technical specifications page 25 of 31