User's Manual

Document : CS-SUP-MUTI-WPORTAPP-E02.sxw
3.2.8 - TEST Mode
This mode is used for tests of installation, or a characterization of defect.
a) Command
CMD NAME DESCRIPTION
0xB0 MODE_TEST Position the WaveCard module in a test mode
b) Format of the command
MODE_TEST
HEADER CMD DATA CRC ETX
3 bytes 1 byte 1 byte 2 bytes 1 byte
0xFF ; 0x02 ; 0x05 0xB0 Test mode value 0x03
With,
Test Mode Value Description
0x00 Permanent reception
0x01 Permanent transmission without modulation
0x02 Permanent transmission with modulation
0x03 Stand by mode
WaveCard user handbook page 32 of 67