User's Manual

Document : CS-SUP-MUTI-WPORTAPP-E02.sxw
➢ Response received by the host, with RELAY_ROUTE_STATUS activated
RECEIVED_FRAME_RELAYED
HEADER CMD DATA CRC ETX
3 bytes 1 byte 6 bytes 1 byte variable variable 2 bytes 1 byte
0xFF ; 0x02 ; 0xXX 0x35
Radio
address from
transmitter
equipment
Number of
repeaters
used
Radio
addresses of
the repeaters
used
data from received frame
the maximum size ( N
bytes) is defined below
0x03
The field 'Radio addresses of the repeaters used' can have a size of 6, 12, or 18 bytes, according to the
number of repeaters used.
Remark : maximum size definition
- Point to Point mode : Max = 152 bytes of data
- Relaying mode : Max = 152 – (2 + 6 x Number of repeaters)
=> 1 repeater : 144 bytes of data,
=> 2 repeaters : 138 bytes of data,
=> 3 repeaters : 132 bytes of data.
c) Diagram of the relaying mode
 With RELAY_ROUTE_STATUS parameter deactivated ( = 0x00 )
WaveCard user handbook page 46 of 67