Specification

Material Safety Data Sheet
101 N. Wacker Drive; Suite 2005
Chicago, IL 60606
800-361-5150 Fax: [phone]
IMPORTANT NOTE:
Th
is material safety data sheet (MSDS) conforms to the U.S. Department of Labor Occupational Safety and Health Administration
requirements in 29 CFR 1910.1200 and is an integral part of any “RIGHT TO KNOW” program. This information should be read by
the customer and made available to anyone who has reason to use or to come in contact with this product.
Section 1 A – Product Identification – Coroplast™
Product Name: COROPLAST™ CORRUGATED SHEETING
Chemical Name(s) and/or synonym(s): POLYPROPYLENE COPOLYMER
Chemical Family: PROPRIETARY FORMULA
Section 2 A – Hazardous Components – Coroplast™
Chemical Name(s): C.A.S.# % TLV PEL
IMPORTANT NOTE:
Pigments, additives and stabilizers are fully encapsulated in resin and are not expected to cause any hazardous conditions when
processed in accordance with good manufacturing practices.
Any substance listed in Section 2 A are those identified as being present at a concentration of 1.0% or greater, or 0.1% or greater if the
substance is on the list of potential carcinogens cited in the OSHA HAZARD COMMUNICATION STANDARD or by the
respective manufacturer. Where a proprietary ingredient shows, the identity of this substance may be made available as provided in 29
CFR 1910.1200.
Section 3 A – Physical Data – Coroplast™
Specific Gravity (H²O-1.0): .90 - .96
Physical Form: Opaque, Fluted Sheets
Solubility In Water: Essentially insoluble in water
Section 1 B – Product Identification – Anti-Static
Product Name: COROPLAST™ ANTI-STATIC CORRUGATED SHEETING
Chemical Name(s) and/or synonym(s): ANTI-STATIC POLYPROPYLENE COPOLYMER
Chemical Family: PROPRIETARY FORMULA
Section 2 B – Hazardous Components – Anti-Static
Chemical Name(s): C.A.S.# % TLV PEL
IMPORTANT NOTE:
Pigments, additives and stabilizers are fully encapsulated in resin and are not expected to cause any hazardous conditions when
processed in accordance with good manufacturing practices.
Any substance listed in Section 2 B are those identified as being present at a concentration of 1.0% or greater, or 0.1% or greater if the
substance is on the list of potential carcinogens cited in the OSHA HAZARD COMMUNICATION STANDARD or by the
respective manufacturer. Where a proprietary ingredient shows, the identity of this substance may be made available as provided in 29
CFR 1910.1200.
Section 3 B – Physical Data – Anti-Static
Specific Gravity (H²O-1.0): .90 - .95
Physical Form: Opaque, Fluted Sheets
Solubility In Water: Essentially insoluble in water