OMNI www.coros.
OMNI Smart Cycling Helmet Bone Conduction Audio. The integrated open ear Bone Conduction Audio system delivers precision audio and full environmental awareness.
How to Wear Your Helmet How to Wear Your Helmet, cont. • The tri-glide splitter as shown in Fig. 3 is a key component for positioning the helmet. Adjust the tri-glide splitters on each side of the helmet so that the left strap and right strap come together just under the earlobes. O-Ring Fig. 1. Correct Tri-glide splitters Fig. 2. Incorrect Warning: Please do not wear an improperly sized helmet even after adjusting its fastening system. Put the helmet on your head as shown in Fig.1.
How to Wear Your Helmet, cont. • The COROS™ helmet is equipped with an adjustable fit system which helps stabilize the helmet when worn in the correct position while riding. Fig. 5 shows where to locate the adjustable knob. Turn the knob clockwise to tighten and counter-clockwise to loosen. How to Operate Smart Functions Charging Please fully charge up your OMNI helmet before using. To charge the helmet, open the Micro USB protective cover, located at the back of helmet.
Pairing your COROS Helmet 1. See www.coros.com for compatible IOS and Andriod devices. 2. To pair your helmet to your phone, first power on the helmet. On your phone, turn Bluetooth“On”. To enter the Bluetooth Pairing interface, find OTHER DEVICES, and select“COROS™ Helmets”.(See Fig. 8) 3. Download the COROS™ Helmet APP. (see Fig. 9). Option1: Search and Download > In the App Store, search and find “Coros Helmet”.Download and save it directly to your phone.
2. Mounting your Smart Remote: Your package contains the Smart Remote, plus the remote holder and 2 rubber rings. Find a spot on your bicycle handlebar to mount the holder, near your right or left hand (Fig. 14, Image 1). Position the first rubber ring at one corner of the holder and stretch the ring diagonally to catch on the opposite corner as shown in Image 2. Attach the second rubber ring to the other two corners. Image 3 shows the holder installed correctly, with the Smart Remote placed into position.
Specifications Safety Tail Light Visor Removable visor, interchangeable accessory MIC Latest silicon mic, improved call and wind resistance quality LED Safety cycling light and light sensor. Light activated based on daylight and onset of darkness. 3 RGB LED per side.
Music Play Time 8+ hours play / talk Charge Interface Micro USB Electrical Input DC 5V / 1A Charging Time 2 hours Standby Time Up to 180 days Bluetooth Operational Distance Up to 33 feet Bluetooth Profile BLE, A2DP, HFP, SPP, AVRCP, HSP Speaker Output 0.5W*2 Speaker Volume 85±3dB Mic Sensitivity ﹣42± 3dB PAGE 13 Troubleshooting of Electronic Functions 1. Unable to power on helmet Try charging the helmet from 1 to 2 hours. 2.
authorized to assume liability on behalf of COROS™ in connection with the sale or use of this product. This warranty program covers all parts of your COROS™ product and applies to all types of defects or failure, except for loss. If your COROS™ helmet is found to be defective in materials or workmanship within one year(US & CA & AU)/two years(EU) from the date of purchase, COROS™ or the country distributor will at its sole option either repair or replace the helmet free of charge.
6. The helmet may be damaged and rendered ineffective by petroleum and petroleum products, cleaning agents, paints, adhesives, etc., without the damage being visible to the user. 7. A helmet has a limited lifespan and should be replaced when it shows obvious signs of wear. 8. This helmet should not be used by children while climbing or doing other activities where there is a risk of hanging or strangulation should the child become trapped Please keep the helmet out of reach from children under fi ve. 9.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
