User's Manual

Clean the helmet with mild soapy water. Avoid use of specific
solvents such as ammonia, bleach, paints, abrasives or
hydrocarbons which may damage the helmet and cause it to
fail to protect the head in the accident.
COROS™ Wearables Inc.
3310 Noble Pond Way, Suite 207 Woodbridge, VA 22193 USA
[e-mail]
For updated product and mobile app information, please visit
www.coros.com
Maintenance
1. Keep the helmet far away from high temperatures over 65.5C
or 149.9F, as it may cause damage to the helmet. Do not place
the helmet into dark colored vehicles or store it in tightly sealed
containers or bags where high heat can accumulate and cause
damage to the helmet. Do not use the helmet if it has been
deformed by heat.
2. Make sure the helmet is clean and dry after each use. Store
the helmet in a dry and ventilated location.
Storage
Contact
PAGE 17 PAGE 18
This manual covers important information with respect to
safety, operation and maintenance of the helmet, please read it
carefully before initial use.
1. No helmet can protect its user from all unforeseeable
accidents, including those involving bicycle-to-motor vehicle
collisions. The COROS™ helmet is designed to protect the head
and cannot guard against cervical, spine or other body injuries
that may result from an accident.
2. The helmet is designed to be retained by a strap under the
lower jaw. It is not intended for motorsport, moped or other
uses.
3. To be effective, the helmet must fit properly and be worn
correctly. Securely fasten retention system as shown on page
3-5. Grasp the helmet and try to rotate it to front and rear. A
correctly fitted helmet should be comfortable and should not
move forward to obscure vision or rearward to expose the
forehead.
4. No attachments should be made to the helmet except those
recommended by the helmet manufacturer.
5. The helmet is designed to absorb shock by partial
destruction of the shell and liner. This damage may not be
visible. Therefore, if subjected to a severe blow, the helmet
should be returned to coros under the impact replacement
program. visit www.coros.com for more information.
6. The helmet may be damaged and rendered ineffective by
petroleum and petroleum products, cleaning agents, paints,
adhesives, etc., without the damage being visible to the user.
7. A helmet has a limited lifespan and should be replaced when it
shows obvious signs of wear.
8. This helmet should not be used by children while climbing or
doing other activities where there is a risk of hanging or
strangulation should the child become trapped Please keep the
helmet out of reach from children under fi ve.
9. Please exercise care and good judgment whenever you ride.
Comply with all traffic laws and regulations and do your part to
avoid accidents of any kind.
10. Do not modify or remove any original components of your
helmet, other than as recommended by COROS™. Doing so will
void all COROS™ warranties.
11. Keep your helmet charged with the USB charging adapter.
12. Please mount the Smart Remote into the holder before
each use.
13. The product can be upgraded online through the COROS™
Application. Do not terminate power or force the helmet to turn
off in the course of upgrading; this could lead to booting failures.
14. The COROS™ helmet is water resistant.