User's Manual

How to Wear Your Helmet How to Wear Your Helmet, cont.
PAGE 3 PAGE 4
Warning: Please do not wear an improperly sized helmet even
after adjusting its fastening system.
Put the helmet on your head as shown in Fig.1. Slide the
tri-glide splitters just below your earlobes. Next, adjust the
location of the buckle to provide even tension between your
neck and head. Finally, adjust the knob on the regulator for
proper integration.
• Fig.1 shows the correct way to wear the helmet. Always wear
the helmet with the strap and buckle fastened, and with the
strap pulled tight and positioned back against the throat. The
leading edge of the helmet should land just above the
eyebrows.
• Fig. 2 illustrates the incorrect position for the helmet. Failure
to wear the helmet properly may cause discomfort to the rider
or even cause the helmet to shift or fall off during an accident.
• The tri-glide splitter as shown in Fig. 3 is a key component for
positioning the helmet. Adjust the tri-glide splitters on each
side of the helmet so that the left strap and right strap come
together just under the earlobes.
• Fig. 4 shows how the chin strap also plays an important part
role in positioning the helmet. Adjust the length of the strap
and the location of the buckle to create a comfortable, yet firm
tightness around your chin and head.
Fig. 1. Correct Fig. 2. Incorrect
Tri-glide
splitters
Fig. 3. Fig. 4.
O-Ring