User's Manual

General Safety, Use and Care
This manual covers important information with respect to safety, operation and
maintenance of the helmet, please read it carefully before initial use.
1.
No helmet can protect its user from all
unforeseeable accidents, including those
involving bicycle-to-motor vehicle collisions. T
he C
OROS™ helmet is designed to
protect the head and cannot guard against cervical, spine or other body injuries that
may result from an accident.
2.
The helmet is designed to be retained by a trap under the lower jaw
. It is not
intended for motorspor
t, moped or other uses.
3.
To be effective, the helmet must fi t properly and be worn correctly
. Securely fasten
retention system as shown on page 3-5. Grasp the helmet and try to rotate it to front
and rear
. A correctly fi tted helmet should be comfor
table and should not move forward
to obscure vision or rearward to expose the forehead.
4. No attachments should be made to the helmet except those recommended by the
helmet manufacturer
.
5. The helmet is designed to absorb shock by partial destruction of the shell and liner.
This damage may not be visible. Therefore, if subjected to a severe blow, the helmet
should be destroyed and replaced even if it appears undamaged.
PAGE 15