User's Manual

PAGE 3
How to Wear Your Helmet
Warning: Please do not wear an improperly sized helmet even
after adjusting its fastening system.
Put the helmet on your head as shown in Fig.1. Slide the
tri-glide splitters just below your earlobes. Next, adjust the
location of the buckle to provide even tension between
your neck and head. Finally, adjust the knob on the
regulator for proper integration.
• Fig.1 shows the correct way to wear the helmet.
Always wear the helmet with the strap and buckle
fastened, and with the strap pulled tight and
positioned back against the throat. The leading edge of
the helmet should land just above the eyebrows.
• Fig. 2 illustrates the incorrect position for the helmet.
Failure to wear the helmet properly may cause
discomfort to the rider or even cause the helmet to
shift or fall off during an accident.
Fig. 1. Correct
Fig. 2. Incorrect