Technical Specs
Table Of Contents
- 1. FTAZxxxDAMPERZMR_A4_EN_FR_ES_201
- sPARE dAMPER wireless zONE mODULE
- rEMPLACEMENT DE MODULE DE ZONE DU REGISTRE radio
- mÓDULO DE ZONA DE REEMPLAZO DE COMPUERTA radio
- fcc / Ised
- AZxxxDAMPERZMR
- (EN) TECHNICAL SPECS / (FR) CARACTÉRISTIQUES TECHNIQUES / (ES) CARACTERÍSTICAS TÉCNICAS
- Communication frequency / Fréquence de communication / Frecuencia de comunicación
- (EN) ASSEMBLY / (fr) MontaGe / (ES) Montaje
- (EN) SELF-DIAGNOSIS / (fr) AUTODIAGNoSTIC (es) AUTODIAGNÓSTICO
- (EN) device elements / (fr) éléments du dispositif / (ES) Elementos del dispositivo
- (EN) Connection / (fr) connexion / (ES) Conexión
- 2. FTAZVAFDAMPERxxR_A4_EN_FR_ES_201
- wireless intelligent round damper
- registre motorisée intelligent radio
- Compuerta motorizada inteligente radio
- fcc / Ised
- (EN) TECHNICAL SPECS / (fr) caractÉristiques techniques / (ES) CARACTERÍSTICAS TÉCNICAS
- Communication frequency / Fréquence de communication / Frecuencia de comunicación
- Nota: El dispositivo transmitirá de forma automática en la frecuencia de su región
- (EN) SELF-DIAGNOSIS / (fr) AUTODIAGNoSTIC
- (es) AUTODIAGNÓSTICO
- Damper setting / Réglage des registres
- Ajuste compuertas
- (EN) device elements / (fr) éléments du dispositif / (ES) Elementos del dispositivo
- (EN) Connection / (fr) connexion / (ES) Conexión
- Assembly / Montage / Montaje
- 3. REG_AZ6_FCC_ELV_A4_MUL
FCC/ISED REGULATORY NOTICES
Parque Tecnológico de Andalucía C/Marie Curie, 21 · 29590 Málaga
+ 34 900 400 445 · www.airzone.es
47 CFR § 2.1077 Compliance Information
In accordance with FCC Rules and Regulation
Modification statement
Corporacion Empresarial Altra S.L. has not approved any changes or modifications to this
device by the user. Any changes or modifications could void the user's authority to operate
the equipment.
Interference statement
This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt
RSS standard(s). Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Wireless notice
This device complies with FCC/ISED radiation exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS‐102 of
the ISED radio frequency (RF) Exposure rules. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
FCC Class B digital device notice
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B) / NMB-3 (B)
This Class B digital apparatus complies with Canadian ICES-003.