User's Manual

LX220N User Manual
7
Indicator Color Status Description
Setup.
Off Wi-Fi protected setup is disabled.
USB Green
On A USB flash disk is connected.
Blink Data is being transmitted.
Off No USB connection.
Rear Panel
Figure 2 Rear panel
The following table describes the interface of the device.
Interface/Button Description
DSL
RJ-11 interface connecting to a telephone set through a
telephone cable
LAN1/2
Ethernet RJ-45 interfaces connecting to the Ethernet
interfaces of computers or Ethernet devices
WAN Ethernet RJ-45 interfaces connecting to the WAN interfaces.
USB
USB port, for connecting a 3G network card or other USB
storage devices.
Reset
Reset to the factory defaults. To restore factory defaults, keep
the device powered on and push a paper clip into the hole.
Press down the button for more than 5 seconds and then
release.
ON/OFF Push to power on/off the device.