User's Manual

LX220N User Manual
8
Interface/Button Description
Power
Interface connecting to the power adapter. The power
adapter output is: 12V DC, 1500mA
Side Panel
Interface/Button Description
WPS
This button is used for enabling
WPS PBC mode. If WPS is enabled,
press this button, and then the
wireless router starts to accept the
negotiation of PBC mode.
WLAN
WLAN switch, for enabling or
disabling the WLAN function.
3.2 Hardware Installation
Step 1 Connect the DSL port of the device and the Modem port of the splitter
with a telephone cable. Connect the phone to the Phone port of the
splitter through a telephone cable. Connect the incoming line to the
Line port of the splitter.
The splitter has three ports: