User's Manual

LX220N User Manual

The following table describes the parameters in this page.

Field Description

Enable

Wireless

Select this to turn Wi-Fi on.

AP Isolate Select this to turn AP isolation on.

Wireless

Network Name

(SSID)

The Wireless Network Name is a unique name that

identifies a network. All devices on a network must

share the same wireless network name in order to

communicate on the network. If you decide to change

the wireless network name from the default setting,

enter your new wireless network name in this field.

Visibility Status

You can select Visible or Invisible.

Country Select the country from the drop-down list.

802.11 Mode

Select the appropriate 802.11 mode based on the

wireless clients in your network. The drop-down menu

options are 802.11b only, 802.11g only, 802.11n

only, Mixed 802.11b/g, Mixed 802.11n/g and Mixed

802.11b/g/n.

Band Width

Select the appropriate band as 20M, 40M Plus, or 40M

Minus from the pull-down menu.

Wireless

Channel

Select the wireless channel from the pull-down menu.

It is different for different country.

Transmission Select the transmission rate for the network. The rate