User's Manual

LX220N User Manual

The following table describes the parameters of this page.

Field Description

WEP Key Length

Choose the WEP key length. You can choose 64-bit

or 128-bit.

Default Tx Key

Choose the index of WEP Key. You can choose Key

1, 2, 3 or 4.

WEP Key Format

 When 64-bit key length is selected, you can

choose ASCII (5 characters) or HEX (10

characters).

 When 128-bit key length is selected, you can

choose ASCII (13 characters) or HEX (26

characters).

WEP Key 1/2/3/4

The Encryption keys are used to encrypt the data.

Both the modem and wireless stations must use the

same encryption key for data transmission. The

default key 1 is 1111111111.

Authentication Choose an authentication mode.

Click Apply to save the settings.

When the Security Mode is set as WPA2 only or WPA/WPA2 Mixed, the

following figure appears.