User's Manual

LX220N User Manual
20
The following table describes the parameters in this page.
Field Description
Wireless
Security Mode
Configure the wireless encryption mode. You can
choose None, WEP, WPA2 Only or WPA /WPA2
Mixed.
 Wired equivalent privacy (WEP) encrypts data
frames before transmitting over the wireless network.
 WPA2 is a subset of the IEEE802.11i security
specification draft.
 WPA/WPA2 Mixed is the collection of WPA and
WPA2 encryption modes. The wireless client
establishes the connection between the modem
through WPA or WPA2.
Key differences between WPA and WEP are user
authentication and improved data encryption.
WPA Mode
 Select Personal, and then enter the pre-shared
key in the Pre-Shared Key field.
 Select Enterprise, and then enter the port, IP
address, and password of the Radius server. You need
to enter the password provided by the Radius server
when the wireless client connects the modem.
If the encryption is set to WEP, the modem uses 802.1
X authentication, which is Radius authentication.
Encryption
Mode
When WPA /WPA2 Mixed is selected, you can select
WPA encryption as AES, TKIP or Both.
Group Key
Update Interval
When WPA encryption is applied, messages sent are
encrypted with a password. For higher security, WPA
password is updated periodically. This value is the
update interval of the WPA password.
5.1.3
Local Network
You can configure the LAN IP address according to the actual application. The
preset IP address is 192.168.1.1. You can use the default settings and DHCP