User's Manual

LX220N User Manual
23
The DHCP Cond Option section is shown as below. Here you can specify the
reply message (option 240~245) the modem sends to the client. After DHCP
CLIENT CLASS is configured, you can configure DHCP COND OPTION.
Click Add to add DHCP option as shown in the following figure.
Only when this function is enabled, the modem returns the content below to the
client.
The Cond Option Client Class is the client class name of DHCP Cond Option.
The Cond Option Tag is a part of the value in the message sent by the modem
to the client. It is between 240 and 245.
The Cond Option Value is a value in the message sent by the modem to the
client. This value can be specified at random.
After setting, click Apply to save the settings.
In the Local Network page, you can assign IP addresses on the LAN to specific
individual computers based on their MAC addresses.
Click Add to add static DHCP (optional). The page shown in the following figure
appears.