User's Manual

LX220N User Manual
26
Field Description
Interface ID
DHCPv6 Lease
Time
IPv6 lease time.
Get DNS Servers
from WAN
You can choose to get the IPv6 DNS server address
from the WAN side.
Static DNS
Servers
You can manually set the IPv6 DNS server address.
Static IPv6 DNS
Servers
Input an IPv6 DNS server address.
Enable RADVD
The router advertisement daemon (RADVD) is run
by Linux or BSD systems acting as IPv6 routers. It
sends router advertisement messages, specified by
RFC2461, to a local Ethernet LAN periodically and
when requested by a node sending a router
solicitation message. These messages are required
for IPv6 stateless auto-configuration.
Auto get prefix
from WAN
You can choose to get an IPv6 prefix from the WAN
automatically.
WAN interface
You can choose to get an IPv6 prefix from the
selected WAN connection.
Static
You can choose to specify an IPv6 prefix.
Site Prefix
Input an IPv6 prefix.
After finishing setting, click the Apply button to apply the settings.
5.1.5
Time and Date
Choose Setup > Time and Date. The page shown in the following figure
appears.