User's Manual

LX220N User Manual

5.2.4

DMZ

Since some applications are not compatible with NAT, the device supports the

use of a DMZ IP address for a single host on the LAN. This IP address is not

protected by NAT and it is visible to agents on the Internet with the correct type of

software. Note that any client PC in the DMZ is exposed to various types of

security risks. If you use the DMZ, take measures (such as client-based virus

protection) to protect the remaining client PCs on your LAN from possible

contamination through DMZ.

Choose Advanced > DMZ. The page shown in the following figure appears.

Choose to enable DMZ, input a DMZ host ip address or Select a IP from list, and

click then Apply to save the settings.

5.2.5

SAMBA

Select Advanced > SAMBA. The page shown in the following figure appears.