User's Manual

LX220N User Manual
47
The following table describes the parameters of this page.
Field Description
Connection Choose an IPv6 WAN connection.
Enable Tick in the box to enable a firewall rule.
Protocol
Choose a protocol corresponding to the rule. You
may choose TCP, UDP, ICMPv6 or TCP/UDP.
Source/ Destination
IP
Original/ destination IP address
Source prefix length
Original/ destination mask
Source/Destination
Port
Original/ end port, which is the original port range
Description
You can describe this IPv6 filter rule.
After setting the parameters, click Submit. The page shown in the following
figure appears. You can also click Edit or Delete to manage the rule.