User's Manual

LX220N User Manual
68
5.2.11.3 Policy Route
Choose Advanced > Routing and click Policy Route. The page shown in the
following figure appears. The policy route binds one WAN connection and one
LAN interface.
Click Add, and the page shown in the following figure appears. Choose one WAN
connection and at lease one LAN connection to bind together, and then click
Apply.
5.2.11.4 RIP
Choose Advanced > Routing and click RIP. The page shown in the following
figure appears. This page is used to select the interfaces on your device that use
RIP and the version of the protocol used.