User's Manual

LX220N User Manual
6
Figure 1 Front panel
The following table describes the indicators on the front panel.
Indicator Color Status Description
Power
Green
On The device is powered on.
Off The device is powered off.
Red On
Self-test fails, or failure occurs, or the device is
starting.
DSL Green
On DSL link is established.
Slow
Blink
The DSL line is attempting to detect signals.
Fast Blink
Signals have been detected, and the DSL line is
attempting to establish link.
Internet
Green
On
Physical layer connection and IP connection is
established in routing mode.
Blink
IP connection is established, and messages are
being transmitted.
Off
IP connection or physical layer link is not
established.
Red On IP connection fails.
WAN Green
On WAN link is established.
Blink
Data is being transmitted through a WAN
interface.
Off WAN link is not established.
LAN 1/2 Green
On Ethernet link is established.
Blink
Data is being transmitted through a LAN
interface.
Off Ethernet link is not established.
WLAN Green
On WLAN is enabled.
Blink
Data is being transmitted by the wireless
module.
Off WLAN is disabled.
WPS Green
On
Negotiation is successful under Wi-Fi protected
setup.
Blink Negotiation is in progress under Wi-Fi protected