Owner`s manual

4-13
Controls and Indicators
Ballast Screen
If your boat is equipped with a ballast system, you can press and
release the SELECT button to toggle to another screen that will
display the water levels in each ballast tank.
Actual Speed Calibration
The actual speed can be calibrated through the Menu Options
choice entitled “Calibrate Paddle Wheel.”
Setting Speed Control
Press and release the ON/OFF/MENU button to activate the speed
control function. Push the throttle control handle down towards
full throttle until you hear a beep. The Nautique Digital Cruise will
now allow the boat to accelerate to the set speed. To disengage the
Nautique Cruise, press and release the ON/OFF/MENU button.
Nautique Digital Cruise will still control the speed until the throttle
is reduced below the set speed.
Set speed can be adjusted with the Nautique Digital Cruise on or off
by pressing the UP/DOWN arrow buttons until the desired
speed is displayed on the screen. This allows the user to make fine
adjustments during a run or have the next desired speed set and
ready for the next user.
D-Drive Sec 4_2013_Nautique Ski Sec 4.qxd 7/3/12 10:15 AM Page 13