Specifications

NEW
Delta “T” Systems
www.deltatsystems.com
The Head Vent System
A Fully Automatic Air Extraction System
Using One Remotely Located Blower For Multiple Heads
Overview — The new Head Vent
System is tomorrow’s ventilation
technology that is available for your
vessel today. Noisy and ineffec-
tive in line fans are replaced by
a single remotely located plenum
box, which automatically evacuates
the stale air from multiple heads as
needed.
System Application — The Head
Vent System uses motion sensors
mounted in each head to detect
occupancy and begin the ow of
air. When the occupant leaves the
head, the ow of air will continue
for a pre-selected period of time
and then will automatically shut
down. The run time for each head
is set by the user when the system
is installed. Each head may be
set independently with a different
run time in order to accommodate
varying head sizes as well as per-
sonal preferences.
System Benets — The Multiple
Compartment Vent System is
powerful, quiet and fully automatic.
All major components are housed
within a single plenum box and
the plenum box may be located
remotely in any suitable space
and oriented in any required man-
ner. The system is simple to install
and may be plumed using either
three or four inch piping. Only one
exhaust duct means that only one
location is needed for stale air
to exit the vessel. If desired, the
system may also be used manually
by installing a switch in each head
instead of a motion sensor.
20
Visit www.deltatsystems.com for specifications