Specifications
Call 561-204-1500 for more information
23
NEW
Delta “T” Systems
www.deltatsystems.com
Overview
The new Wet Zone Sentry Sys-
tem is unlike anything on the market
today. A single compact control box
provides the intelligence and the
muscle to perform two key functions:
First, the Wet Zone Sentry System
will earn its way into the captain’s
heart by keeping all of the wet com-
partments or “Zones” in the vessel
bone dry. Secondly, the system will
earn the Sentry portion of its name by
logging and displaying the historical
data for all of the wet zones on the
vessel so that irregularly high pump-
ing activity can be investigated and
corrected at the source before the
problem escalates.
In the past, even a well made
vessel has always had pockets of
water or other uids which cause foul
odors, accelerated corrosion and an
unsightly mess in the bilge, in HVAC
drip pans, in shower sumps or in
drip boxes. Fluid lled bilge compart-
ments also made it very difcult to
isolate an oil or uid leak below deck.
The Wet Zone Sentry System makes
those problems a thing of the past.
New vessels can keep their bilges
and other wet zones looking like they
did the day the boat was launched,
while keeping track of the pumping
activity in those areas and avoiding
the problems associated with excess
water or other uids.
Equally important to the pump-
ing functions of the Wet Zone Sentry
System are the data logging features
of the system. Keeping track of the
pump-out time for each wet zone on
board the vessel provides valuable
data that can catch small leaks below
deck or in other locations before they
turn into large problems. The data
also serves to prove the long-term
integrity of the vessel during a survey
for a prospective buyer or an insur-
ance event.
The System
The Wet Zone Sentry System is
made up of a central control enclo-
sure, a color touch screen and up to
eight low water sensors. The con-
trol enclosure may be located in the
engine room or elsewhere and only
requires a 110 VAC power connec-
tion. The touch screen is typically lo-
cated in the front panel of the control
enclosure. The low water sensors are
placed at the lowest point of each wet
zone and only a small 3/16 inch hose
is run back to the control enclosure.
The system is simple to install and
very intuitive to operate.
System Operation
The Wet Zone Sentry System is
controlled through the color touch
screen. When the system is powered
up, it will test each compartment
or “wet zone” on the vessel for the
presence of uid. If it detects water or
other uids it will pump the wet com-
partments out and log the time that
it took to clean each compartment.
When all zones have been checked
and pumped out, then the system will
hibernate for a preselected period of
time (factory setting is 3 hours).
After the hibernation time, the system
will wake up and re-test each zone
and remove any uids that it may
nd. The system is seamless and
this pattern continues on indenitely.
Display screens show the system
status at all times as well as allow for
adjustments to most system param-
eters. No other system even comes
close to the form, function and fea-
tures of the Bilge Sentry System.
Wet Zone
Sentry
DELTA “T” SYSTEMS
Wet Zone
Sentry
DELTA “T” SYSTEMS
22
08
03