Owner`s manual

4-30
Standard Equipment
Tow Pylon
The tow pylon is manufactured from high strength aluminum alloy,
engineered for durability. It is “hard coat anodized” and
impregnated with a PTFE (teflon) material. If the pylon becomes
loose, stop using the pylon and take the boat to your Correct Craft
Dealer for service.
Section 4
Correct Craft, Inc.
Although the extended pylon and barefoot
booms have become popular additions to many
tournament inboards, Correct Craft strongly objects and
opposes the use of any pylon extension, whether up or
to the side of any of its products. The use of pylon
extensions can alter the handling characteristics of the
boat, possibly resulting in dangerous instability, which
could then lead to loss of control, a situation which
could cause serious or fatal injury to the boat driver,
passengers, skiers and anyone else who might be in the
vicinity of such a mishap.
CAUTION
Avoid personal injury. This water tow
pylon was designed for water skiing only. Any other
uses, such as parasailing, kite flying, towing other boats
and/or using an extended pylon, may overstress the
pylon possibly causing personal injury and/or
equipment damage. DO NOT sit behind (aft) the tow
pylon when towing skiers.
!
WARNING
Nautique Sport Sec 4.qxd 7/28/03 12:45 PM Page 30